View B41789K7827Q001_8092270.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

aluminum electrolytic capacitors axial-lead and soldering star capacitors series/type: b41689, b41789 date: december 2014 ? epcos ag 2014. reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without epcos' prior express consent is prohibited.
applications automotive electronics features high vibration stability, special design with high vibration stability up to 45 g available upon request very high ripple current capability long useful life, 2000 h at up to 150 c low esr also at 63 v dc storage for up to 15 years at a temperature of up to 35 c. if the capacitor is stored for longer than two years, the operating voltage must be applied for one hour to ensure the specified leakage current. rohs-compatible construction charge/discharge-proof, polar aluminum case with insulating sleeve negative pole connected to case terminals axial leads, welded to ensure perfect electrical contact soldering star for upright mounting on pcb available alternative axial-lead design with double-sided plates for horizontal mounting available upon request taping and packing axial-lead capacitors will be delivered in pallet package capacitors with d l 16 30 mm are also available taped on reel soldering star capacitors are packed in cardboard axial-lead and soldering star capacitors b41689, b41789 very high ripple current up to 150 c page 2 of 19 please read cautions and warnings and important notes at the end of this document.
1) if optimum circuit design is used, the values are lower by 30%. 2) refer to chapter "general technical information, 5 useful life" on how to interpret useful life. 3) esr max at 100 hz, 20 c specifications and characteristics in brief rated voltage v r 25 ... 63 v dc surge voltage v s 1.15 v r for 40 v dc 1.10 v r for 63 v dc rated capacitance c r 270 ... 4500 f capacitance tolerance 10/+30% q leakage current i leak (5 min, 20 c) self-inductance esl 1) diameter d (mm) 16 18 20/21 terminals length l (mm) approx. esl (nh) axial 25 26 30 29 38 30 29 34 35 31 39 33 38 45 49 50 soldering star 25 7 8 30 8 10 35 9 39 9 11 13 49 14 useful life 2) requirements: 150 c; v r ; 0.5 i ac,r > 2000 h d c/c 30% of initial value 125 c; v r ; i ac,r > 10000 h esr 3 times initial specified limit 3) 125 c; v r ; i ac,max > 4000 h i leak initial specified limit 40 c; v r ; 2.1 i ac,r > 500000 h voltage endurance test post test requirements: 125 c; v r 4000 h d c/c 10% of initial value esr 1.3 times initial specified limit 3) i leak initial specified limit vibration resistance test to iec 60068-2-6, test fc: frequency range 10 hz ... 2 khz, displace- ment amplitude max. 1.5 mm, acceleration max. 20 g , duration 3 2 h. capacitor mounted by its wire leads at a distance of (6 1) mm from the case and additionally clamped by the case. iec climatic category to iec 60068-1: 55/125/56 ( 55 c/+125 c/56 days damp heat test) detail specification sectional specification similar to cecc 30301-802 iec 60384-4 b41689, b41789 very high ripple current up to 150 c page 3 of 19 please read cautions and warnings and important notes at the end of this document.
b41689, axial-lead capacitors dimensional drawing dimensions, weights and packing units d l d max i max approx. weight packing units (pcs.) mm mm g pallet reel 16 25 16.5 25.5 7.4 180 250 16 30 16.5 30.5 8.9 180 250 16 35 16.5 35.5 10.4 180 16 39 16.5 40 11.7 180 18 25 18.5 25.5 9.3 160 18 30 18.5 30.5 11.1 160 18 39 18.5 40 14.7 160 20 29 20.5 29.5 13.5 140 21 39 21.5 40 20.0 140 21 49 21.5 50 25.0 110 b41689, b41789 very high ripple current up to 150 c page 4 of 19 please read cautions and warnings and important notes at the end of this document.
b41789, soldering star capacitors dimensional drawings mounting holes d = 16 mm ... 21 mm dimensions, weights and packing units d l d max i max c 0.1 e 0.1 approx. weight packing units mm mm mm mm g pcs. 16 25 17.5 27 16.5 3.0 7.9 300 16 30 17.5 32 16.5 3.0 9.4 300 16 35 17.5 37 16.5 3.0 10.9 200 16 39 17.5 41.5 16.5 3.0 12.2 200 18 25 19.5 27 18.5 3.0 9.9 300 18 30 19.5 32 18.5 3.0 11.8 300 18 39 19.5 41.5 18.5 3.0 15.4 200 21 39 22.5 41.5 21.5 3.5 21.0 324 21 49 22.5 51.5 21.5 3.5 26.0 264 b41689, b41789 very high ripple current up to 150 c page 5 of 19 please read cautions and warnings and important notes at the end of this document.
overview of available types v r (v dc) 25 40 63 case dimensions d l (mm) c r ( m f) 270 16 25 330 16 30 390 18 25 470 16 35 560 16 25 18 30 590 16 39 600 20 29 680 18 25 720 16 30 820 16 35 18 39 900 18 30 1000 16 25 16 39 21 39 1200 18 25 20 29 1300 16 30 21 49 1400 18 39 1500 16 35 1700 18 30 1800 16 39 1900 20 29 2000 21 39 2200 18 39 2700 21 49 3300 21 39 4500 21 49 b41689, b41789 very high ripple current up to 150 c page 6 of 19 please read cautions and warnings and important notes at the end of this document.
case dimensions and ordering codes v r v dc c r 120 hz 20 c m f case dimensions d l mm ordering code axial pallet ordering code axial reel ordering code soldering star ? increased ripple current due to optimized thermal design 25 1000 16 25 b41689a5108q001 b41689a5108q003 b41789a5108q001 1000 ? 16 25 b41689k5108q001 b41689k5108q003 b41789k5108q001 1200 18 25 b41689a5128q001 b41789a5128q001 1200 ? 18 25 b41689k5128q001 b41789k5128q001 1300 16 30 b41689a5138q001 b41689a5138q003 b41789a5138q001 1300 ? 16 30 b41689k5138q001 b41689k5138q003 b41789k5138q001 1500 16 35 b41689a5158q001 b41789a5158q001 1500 ? 16 35 b41689k5158q001 b41789k5158q001 1700 18 30 b41689a5178q001 b41789a5178q001 1700 ? 18 30 b41689k5178q001 b41789k5178q001 1800 16 39 b41689a5188q001 b41789a5188q001 1800 ? 16 39 b41689k5188q001 b41789k5188q001 1900 20 29 b41689a5198q001 1900 ? 20 29 b41689k5198q001 2200 18 39 b41689a5228q001 b41789a5228q001 2200 ? 18 39 b41689k5228q001 b41789k5228q001 3300 21 39 b41689a5338q001 b41789a5338q001 3300 ? 21 39 b41689k5338q001 b41789k5338q001 4500 21 49 b41689a5458q001 b41789a5458q001 4500 ? 21 49 b41689k5458q001 b41789k5458q001 40 560 16 25 b41689a7567q001 b41689a7567q003 b41789a7567q001 560 ? 16 25 b41689k7567q001 b41689k7567q003 b41789k7567q001 680 18 25 b41689a7687q001 b41789a7687q001 680 ? 18 25 b41689k7687q001 b41789k7687q001 720 16 30 b41689a7727q001 b41689a7727q003 b41789a7727q001 720 ? 16 30 b41689k7727q001 b41689k7727q003 b41789k7727q001 820 16 35 b41689a7827q001 b41789a7827q001 820 ? 16 35 b41689k7827q001 B41789K7827Q001 900 18 30 b41689a7907q001 b41789a7907q001 900 ? 18 30 b41689k7907q001 b41789k7907q001 1000 16 39 b41689a7108q001 b41789a7108q001 1000 ? 16 39 b41689k7108q001 b41789k7108q001 b41689, b41789 very high ripple current up to 150 c page 7 of 19 please read cautions and warnings and important notes at the end of this document.
case dimensions and ordering codes v r v dc c r 120 hz 20 c m f case dimensions d l mm ordering code axial pallet ordering code axial reel ordering code soldering star ? increased ripple current due to optimized thermal design 40 1200 20 29 b41689a7128q001 1200 ? 20 29 b41689k7128q001 1400 18 39 b41689a7148q001 b41789a7148q001 1400 ? 18 39 b41689k7148q001 b41789k7148q001 2000 21 39 b41689a7208q001 b41789a7208q001 2000 ? 21 39 b41689k7208q001 b41789k7208q001 2700 21 49 b41689a7278q001 b41789a7278q001 2700 ? 21 49 b41689k7278q001 b41789k7278q001 63 270 16 25 b41689a8277q001 b41689a8277q003 b41789a8277q001 270 ? 16 25 b41689k8277q001 b41689k8277q003 b41789k8277q001 330 16 30 b41689a8337q001 b41689a8337q003 b41789a8337q001 330 ? 16 30 b41689k8337q001 b41689k8337q003 b41789k8337q001 390 18 25 b41689a8397q001 b41789a8397q001 390 ? 18 25 b41689k8397q001 b41789k8397q001 470 16 35 b41689a8477q001 b41789a8477q001 470 ? 16 35 b41689k8477q001 b41789k8477q001 560 18 30 b41689a8567q001 b41789a8567q001 560 ? 18 30 b41689k8567q001 b41789k8567q001 590 16 39 b41689a8597q001 b41789a8597q001 590 ? 16 39 b41689k8597q001 b41789k8597q001 600 20 29 b41689a8607q001 600 ? 20 29 b41689k8607q001 820 18 39 b41689a8827q001 b41789a8827q001 820 ? 18 39 b41689k8827q001 b41789k8827q001 1000 21 39 b41689a8108q001 b41789a8108q001 1000 ? 21 39 b41689k8108q001 b41789k8108q001 1300 21 49 b41689a8138q001 b41789a8138q001 1300 ? 21 49 b41689k8138q001 b41789k8138q001 b41689, b41789 very high ripple current up to 150 c page 8 of 19 please read cautions and warnings and important notes at the end of this document.
1) maximum ripple current at 125 c capacitor case temperature t c (measured at aluminum case surface), when mounted to a heat sink. further details available upon request. technical data c r 120 hz 20 c m f case dimensions d l mm esr max 100 hz 20 c m w esr max 100 hz 40 c m w esr max 10 khz 20 c m w z max 100 khz 20 c m w i ac,max 1) 10 khz t c 125 c a i ac,max 10 khz 125 c a i ac,r 10 khz 125 c a i ac,max 10 khz 150 c a ? increased ripple current due to optimized thermal design v r = 25 v dc 1000 16 25 98 565 53 50 9.2 5.7 3.5 1.7 1000 ? 16 25 98 565 53 50 10.1 6.0 3.6 1.8 1200 18 25 80 470 43 41 11.1 6.9 4.2 2.1 1200 ? 18 25 80 470 43 41 12.2 7.2 4.4 2.2 1300 16 30 75 435 41 39 11.4 7.1 4.3 2.2 1300 ? 16 30 75 435 41 39 12.5 7.4 4.5 2.2 1500 16 35 65 377 35 34 13.3 8.3 5.0 2.5 1500 ? 16 35 65 377 35 34 14.6 8.6 5.2 2.6 1700 18 30 57 332 31 29 14.1 8.8 5.3 2.7 1700 ? 18 30 57 332 31 29 15.5 9.1 5.5 2.8 1800 16 39 55 314 30 28 15.1 9.4 5.7 2.9 1800 ? 16 39 55 314 30 28 16.6 9.8 5.9 3.0 1900 20 29 52 297 28 27 14.5 9.1 5.5 2.7 1900 ? 20 29 52 297 28 27 16.0 9.5 5.7 2.9 2200 18 39 44 257 24 23 18.3 11.4 6.9 3.4 2200 ? 18 39 44 257 24 23 20.1 11.8 7.2 3.6 3300 21 39 31 172 17 16 21.0 13.1 7.9 4.0 3300 ? 21 39 31 172 17 16 23.2 13.6 8.3 4.1 4500 21 49 23 126 13 12 26.5 16.5 10.0 5.0 4500 ? 21 49 23 126 13 12 29.2 17.2 10.4 5.2 v r = 40 v dc 560 16 25 129 587 53 50 9.2 5.7 3.5 1.7 560 ? 16 25 129 587 53 50 10.1 6.0 3.6 1.8 680 18 25 105 483 43 41 11.1 6.9 4.2 2.1 680 ? 18 25 105 483 43 41 12.3 7.2 4.4 2.2 720 16 30 100 457 42 39 11.4 7.1 4.3 2.1 720 ? 16 30 100 457 42 39 12.5 7.4 4.5 2.2 820 16 35 88 401 36 34 13.2 8.2 5.0 2.5 820 ? 16 35 88 401 36 34 14.5 8.6 5.2 2.6 900 18 30 80 365 33 31 13.9 8.6 5.2 2.6 900 ? 18 30 80 365 33 31 15.2 9.0 5.4 2.7 1000 16 39 73 329 30 29 15.1 9.4 5.7 2.8 1000 ? 16 39 73 329 30 29 16.6 9.8 5.9 3.0 b41689, b41789 very high ripple current up to 150 c page 9 of 19 please read cautions and warnings and important notes at the end of this document.
2) maximum ripple current at 125 c capacitor case temperature t c (measured at aluminum case surface), when mounted to a heat sink. further details available upon request. technical data c r 120 hz 20 c m f case dimensions d l mm esr max 100 hz 20 c m w esr max 100 hz 40 c m w esr max 10 khz 20 c m w z max 100 khz 20 c m w i ac,max 2) 10 khz t c 125 c a i ac,max 10 khz 125 c a i ac,r 10 khz 125 c a i ac,max 10 khz 150 c a ? increased ripple current due to optimized thermal design v r = 40 v dc 1200 20 29 61 274 26 24 14.9 9.3 5.6 2.8 1200 ? 20 29 61 274 26 24 16.5 9.7 5.9 2.9 1400 18 39 52 235 22 20 18.9 11.8 7.1 3.6 1400 ? 18 39 52 235 22 20 20.8 12.2 7.4 3.7 2000 21 39 38 165 16 16 21.3 13.2 8.0 4.0 2000 ? 21 39 38 165 16 16 23.4 13.8 8.4 4.2 2700 21 49 28 123 12 12 26.8 16.7 10.1 5.0 2700 ? 21 49 28 123 12 12 29.5 17.4 10.5 5.3 v r = 63 v dc 270 16 25 218 777 66 63 8.4 5.2 3.2 1.6 270 ? 16 25 218 777 66 63 9.2 5.4 3.3 1.6 330 16 30 178 636 54 51 10.3 6.4 3.9 1.9 330 ? 16 30 178 636 54 51 11.2 6.6 4.0 2.0 390 18 25 160 602 54 51 9.5 5.9 3.6 1.8 390 ? 18 25 160 602 54 51 10.4 6.1 3.7 1.9 470 16 35 131 498 43 41 12.3 7.7 4.6 2.3 470 ? 16 35 131 498 43 41 13.4 7.9 4.8 2.4 560 18 30 113 420 39 37 12.0 7.5 4.5 2.3 560 ? 18 30 113 420 39 37 13.1 7.7 4.7 2.3 590 16 39 105 397 35 33 14.2 8.8 5.3 2.7 590 ? 16 39 105 397 35 33 15.5 9.1 5.5 2.8 600 20 29 99 350 31 29 13.9 8.7 5.3 2.6 600 ? 20 29 99 350 31 29 15.2 9.0 5.4 2.7 820 18 39 78 287 27 26 16.1 10.0 6.1 3.0 820 ? 18 39 78 287 27 26 17.6 10.4 6.3 3.1 1000 21 39 61 211 19 18 20.0 12.4 7.5 3.8 1000 ? 21 39 61 211 19 18 21.8 12.9 7.8 3.9 1300 21 49 47 162 15 14 25.1 15.6 9.5 4.7 1300 ? 21 49 47 162 15 14 27.4 16.2 9.8 4.9 b41689, b41789 very high ripple current up to 150 c page 10 of 19 please read cautions and warnings and important notes at the end of this document.
1) refer to chapter "general technical information, 5 useful life" on how to interpret useful life. useful life 1) depending on ambient temperature t a under ripple current operating conditions at v r b41689, b41789 very high ripple current up to 150 c page 11 of 19 please read cautions and warnings and important notes at the end of this document.
frequency factor of permissible ripple current i ac versus frequency f frequency characteristics of esr typical behavior equivalent series resistance esr versus frequency f typical behavior for 1000 f/63 v impedance z versus frequency f typical behavior for 1000 f/63 v b41689, b41789 very high ripple current up to 150 c page 12 of 19 please read cautions and warnings and important notes at the end of this document.
cautions and warnings personal safety the electrolytes used by epcos have been optimized both with a view to the intended application and with regard to health and environmental compatibility. they do not contain any solvents that are detrimental to health, e.g. dimethyl formamide (dmf) or dimethyl acetamide (dmac). furthermore, some of the high-voltage electrolytes used by epcos are self-extinguishing. as far as possible, epcos does not use any dangerous chemicals or compounds to produce operating electrolytes. however, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no alternative materials are currently known. however, the amount of dangerous materials used in our products is limited to an absolute minimum. materials and chemicals used in epcos aluminum electrolytic capacitors are continuously adapted in compliance with the epcos corporate environmental policy and the latest eu regulations and guidelines such as rohs, reach/svhc, gadsl, and elv. mds (material data sheets) are available on the epcos website for all types listed in the data book. mds for customer specific capacitors are available upon request. msds (material safety data sheets) are available for all of our electrolytes upon request. nevertheless, the following rules should be observed when handling aluminum electrolytic capacitors: no electrolyte should come into contact with eyes or skin. if electrolyte does come into contact with the skin, wash the affected areas immediately with running water. if the eyes are affected, rinse them for 10 minutes with plenty of water. if symptoms persist, seek medical treatment. avoid inhaling electrolyte vapor or mists. workplaces and other affected areas should be well ventilated. clothing that has been contaminated by electrolyte must be changed and rinsed in water. b41689, b41789 very high ripple current up to 150 c page 13 of 19 please read cautions and warnings and important notes at the end of this document.
product safety the table below summarizes the safety instructions that must be observed without fail. a detailed description can be found in the relevant sections of chapter "general technical information". topic safety information reference chapter "general technical information" polarity make sure that polar capacitors are connected with the right polarity. 1 "basic construction of aluminum electrolytic capacitors" reverse voltage voltages of opposite polarity should be prevented by connecting a diode. 3.1.6 "reverse voltage" mounting position of screw- terminal capacitors screw terminal capacitors must not be mounted with terminals facing down unless otherwise specified. 11.1. "mounting positions of capacitors with screw terminals" robustness of terminals the following maximum tightening torques must not be exceeded when connecting screw terminals: m5: 2.5 nm m6: 4.0 nm 11.3 "mounting torques" mounting of single-ended capacitors the internal structure of single-ended capacitors might be damaged if excessive force is applied to the lead wires. avoid any compressive, tensile or flexural stress. do not move the capacitor after soldering to pc board. do not pick up the pc board by the soldered capacitor. do not insert the capacitor on the pc board with a hole space different to the lead space specified. 11.4 "mounting considerations for single-ended capacitors" soldering do not exceed the specified time or temperature limits during soldering. 11.5 "soldering" soldering, cleaning agents do not allow halogenated hydrocarbons to come into contact with aluminum electrolytic capacitors. 11.6 "cleaning agents" upper category temperature do not exceed the upper category temperature. 7.2 "maximum permissible operating temperature" passive flammability avoid external energy, e.g. fire. 8.1 "passive flammability" b41689, b41789 very high ripple current up to 150 c page 14 of 19 please read cautions and warnings and important notes at the end of this document.
topic safety information reference chapter "general technical information" active flammability avoid overload of the capacitors. 8.2 "active flammability" maintenance make periodic inspections of the capacitors. before the inspection, make sure that the power supply is turned off and carefully discharge the electricity of the capacitors. do not apply excessive mechanical stress to the capacitor terminals when mounting. 10 "maintenance" storage do not store capacitors at high temperatures or high humidity. capacitors should be stored at +5 to +35 c and a relative humidity of 75%. 7.3 "shelf life and storage conditions" reference chapter "capacitors with screw terminals" breakdown strength of insulating sleeves do not damage the insulating sleeve, especially when ring clips are used for mounting. "screw terminals accessories" display of ordering codes for epcos products the ordering code for one and the same product can be represented differently in data sheets, data books, other publications and the website of epcos, or in order-related documents such as shipping notes, order confirmations and product labels. the varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products. detailed information can be found on the internet under www.epcos.com/orderingcodes b41689, b41789 very high ripple current up to 150 c page 15 of 19 please read cautions and warnings and important notes at the end of this document.
symbols and terms symbol english german c capacitance kapazit?t c r rated capacitance nennkapazit?t c s series capacitance serienkapazit?t c s,t series capacitance at temperature t serienkapazit?t bei temperatur t c f capacitance at frequency f kapazit?t bei frequenz f d case diameter, nominal dimension geh?usedurchmesser, nennma? d max maximum case diameter maximaler geh?usedurchmesser esl self-inductance eigeninduktivit?t esr equivalent series resistance ersatzserienwiderstand esr f equivalent series resistance at frequency f ersatzserienwiderstand bei frequenz f esr t equivalent series resistance at temperature t ersatzserienwiderstand bei temperatur t f frequency frequenz i current strom i ac alternating current (ripple current) wechselstrom i ac,rms root-mean-square value of alternating current wechselstrom, effektivwert i ac,f ripple current at frequency f wechselstrom bei frequenz f i ac,max maximum permissible ripple current maximal zul?ssiger wechselstrom i ac,r rated ripple current nennwechselstrom i leak leakage current reststrom i leak,op operating leakage current betriebsreststrom l case length, nominal dimension geh?usel?nge, nennma? l max maximum case length (without terminals and mounting stud) maximale geh?usel?nge (ohne anschlsse und gewindebolzen) r resistance widerstand r ins insulation resistance isolationswiderstand r symm balancing resistance symmetrierwiderstand t temperature temperatur d t temperature difference temperaturdifferenz t a ambient temperature umgebungstemperatur t c case temperature geh?usetemperatur t b capacitor base temperature temperatur des geh?usebodens t time zeit d t period zeitraum t b service life (operating hours) brauchbarkeitsdauer (betriebszeit) b41689, b41789 very high ripple current up to 150 c page 16 of 19 please read cautions and warnings and important notes at the end of this document.
symbol english german v voltage spannung v f forming voltage formierspannung v op operating voltage betriebsspannung v r rated voltage, dc voltage nennspannung, gleichspannung v s surge voltage spitzenspannung x c capacitive reactance kapazitiver blindwiderstand x l inductive reactance induktiver blindwiderstand z impedance scheinwiderstand z t impedance at temperature t scheinwiderstand bei temperatur t tan d dissipation factor verlustfaktor l failure rate ausfallrate e 0 absolute permittivity elektrische feldkonstante e r relative permittivity dielektrizit?tszahl w angular velocity; 2 p f kreisfrequenz; 2 p f note all dimensions are given in mm. b41689, b41789 very high ripple current up to 150 c page 17 of 19 please read cautions and warnings and important notes at the end of this document.
the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical re- quirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application . as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incum- bent on the customer to check and decide whether an epcos product with the properties de- scribed in the product specification is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified . in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-specific notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our ma- terial data sheets on the internet (www.epcos.com/material). should you have any more de- tailed questions, please contact our sales offices. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product specifications. please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . consequently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the fore- going for customer-specific products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current ver- sion of the "general terms of delivery for products and services in the electrical in- dustry" published by the german electrical and electronics industry association (zvei) . important notes page 18 of 19
7. the trade names epcos, alu-x, ceradiode, ceralink, cerapad, ceraplas, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, leaxield, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, pqsine, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, tfap, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.vvv important notes page 19 of 19

▲Up To Search▲

Price & Availability of B41789K7827Q001

	To Download B41789K7827Q001 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .